Wednesday 4 December 2019

Curse of the bendy pikes in 28mm

Eureka Mycenaen spearmen as they arrived:
how could anyone live with these ridiculous whippy extensions?
I bought some Eureka Mycenaen spearmen from their new UK outlet to supplement the Foundry Aegean Bronze Age (Mycenean/Minoan) army I bought at the 2019 SELWG Show for Dragon Rampant/Lion Rampant. They are basically nice sculpts and a good match for Foundry, but they present a particularly bad case of the curse of the bendy pikes. There is no way I would attempt to keep them as they are. I just don’t understand why the designer, manufacturer and other customers should want them like that.

Replacing them is straightforward: it just requires a waste of time, effort and cut fingers.

Clippers, Scalpel, Pin-vice hand drills, Files
First step is to cut away the unwanted cast spears (or whips?). Scalpels might seem the obvious tool for this job but these days I tend mostly to use Clippers and Files. Clippers are great for cleaning up (and conversions). It's surprising how much or how little you can remove with Clippers without damaging what's left behind. Files give a smoother, more rounded finish.

After removal I drill out the hands using a succession of ever-larger Pin-vice hand drills. I have three drills preloaded with different bits. It saves a lot of time changing bits. I think I'll get some more.

North Star wire spears and superglue gell.
Next step is to replace the pikes with wire spears from North Star and other suppliers. I used to use piano wire for pikes, but these days you can get wire with shaped heads and they are only slightly more lethal. These are glued in place with my favourite superglue of recent times, Gorilla Super Glue Gell.

The Foundry Aegean Bronze Age figures are open handed, while the Foundry Nordic Bronze Age figures (which I also bought at the SELWG Show) have thick spears with a reasonable prospect of survival.

Eureka and Foundry spearmen with fitted North Star spears.
I'm prepared to replace a few spears/pikes here and there but I must remember that my next spear/pike army (if there is one) will either come with robust spears or empty hands or be composed of 2mm blocks.

7 comments:

  1. Your solution is a vast improvement over the original.

    ReplyDelete
  2. There is no excuse for bendy pikes like that on 28mm stuff. You have to wonder what the designers were thinking - especially with the cheap availability of commercial spear alternatives.Though I don't game in that scale I would also find it extremely irritating. Nice job on replacing the "whips" though.

    ReplyDelete
    Replies
    1. I’ve done this in 15mm and 28mm with 6mm ongoing...

      Delete
  3. Nice job, but work that a buyer should not be put to.

    ReplyDelete
    Replies
    1. I’m still waiting for a convincing explanation!

      Delete
  4. I should perhaps mention that my replacement spears are shorter than the originals. One source I have described Bronze Age Aegean spears as 12’ while two others said 9’. I opted for 50mm or about 10’. They were commonly used two-handed.

    ReplyDelete