Xenos Rampant

I collected some 15mm Sci-Fi/Near Future forces to play Gruntz 15mm but never got round to completing the project. The publication of Xenos Rampant by Daniel Mersey and Richard Cowan has renewed my interest in the genre. My friend Ian implied that my armies are “not true Sci-Fi” but I’m old school and find a grimey near future or post-Apocalyptic concept more credible than, say, the more exotic Fantasy-tinged Sci-Fi world of Games Workshop. Each to their own.

Happily XR is a remarkably rich and flexible set of rules which will seemingly accommodate any flavour of Sci-Fi. It’s clever, imaginative and colourful and also betrays an appealingly dry sense of humour. Although Gruntz 15mm also looked very good, I‘m swayed by the ease of adopting another Rampant system game which is also likely to go down well in the local club.

On the downside my SF collection includes a lot of vehicles which is not a good match for XR's infantry bias, and I spent a few days looking at 28mm figures as an alternative. I particularly liked the CP Models and Pig Iron figures and may get some next year, but I also decided to keep the 15s as the model ranges are more extensive and the on-table weapons ranges more convincing.

My existing figures are Ground Zero Games (UNSC faction), Armies Army Russian insurgents (now available from The Scene), and some figures in power armour from Brigade Models. Even though I am not short of vehicles, I've ordered a couple of new ones in the light of current military developments as well as some additional infantry support models.

3mm hex terrain for Rommel

My epic indecision about what base sizes and grids to use for Rommel has come down to a trade-off between the attraction of multiple vehicles on big bases with a 6" square grid versus the attraction of using Hexon with necessarily smaller model bases possibly featuring only one or two vehicles.

Other than the Hexon itself, the game requires BUAs, woods, bocage, soft ground and rivers. In this post I am looking at BUAs and woods.

The heading picture (top right) shows a mock-up of a 4" hex BUA using a Hexon forest template and some Brigade Models 2mm buildings from the English Village and Terrace sets. I think these are fine for Belgium but Northern France and Low Countries sets are planned and those will be even better. The buildings are roughly the same height and the bases will sit on top of them when the hex is occupied. If I add taller buildings like churches and factory chimneys, these will have to go at the centre or close to the edges. The 4" hex is economical on buildings and looks 'neat' IMO.

For contrast, the next picture shows a 6" square with a very Roman street pattern. It requires quite a few more buildings and doesn't look very organic. Perhaps I could have arranged the buildings more imaginatively, but there is an inevitable tendency for squareness to beget squareness. Put a few of these on the table and it begins to look like a chess board. Of course, you don't have to make the towns square just because they fit into a square, but given that I will be placing the units on top I need to have the areas filled to give even support.

Finally, we have a mock-up of a hex wood using Woodland Scenics Underbrush of various different colours.

I think the combination of these pieces with Hexon flocked tiles will begin to look quite realistic in a hexed sort of way.

Although using smaller model bases is disappointing, I think the game will look good overall. It also provides a very fitting purpose for all that Hexon I've accumulated...

3mm minis for Rommel Part 2

Any intentions that I declare in this blog should never be taken too seriously. When it comes to wargaming I often change my mind or fail to pursue things!

Original 60mm x 60mm bases

It occurred to me that the infantry stand shown in the last post had enough Laffly trucks to carry 30 men but only 10 men were depicted on the base! There isn’t room to add another 20 figures, so it would seem sensible to reduce the trucks to just one, thus making the vignette more realistic. This would create an anomaly in that the tanks would be a platoon while the infantry would be only a section. Is that something to lose sleep over though? I also thought of mounting all artillery in pairs so that SPGs could be readily distinguished from tanks (mounted in threes).

40mm x 40mm bases

Before making any final commitment to a particular base size, I thought I’d better revisit 40mm x 40mm basing. This will allow use of a 4” grid or Hexon. It had always been my intention to use Hexon for a game like this. One of the main downsides is the smaller label which might be difficult to read in a dimly-lit wargames hall. I could increase the size of the label but then the base would be more cramped, especially if I start doing later war armies with bigger tanks. A relatively bigger label would also begin to overpower the models.

But there are pluses. A big advantage of a 4” grid rather than a 6” one is that I will need a lot less buildings to depict built up areas. This may be disappointing news for Brigade Models but there you are. I will be able to use my Hexon scenery of which I have quite a bit. I will be able to game at home with models. Bigger battles with models will be easier to accommodate on club nights. Storage will be more compact.

Rather empty 40mm x 40mm bases

The cheapskate option: single models rather than multiples. If the model is just an icon this approach is logical, and it’s what many people will be doing with 6mm models. It’s a possibility but with 3mm models it looks a bit thin. Don't take too much notice of the labels - the content is just filler for layout purposes. More specific identification of the hardware for future reference (not required for the game) will be on the underside of the bases. Thanks to advice on the Pendraken Forum, I would cover the labels with plastic film so the track could be marked off with a water-soluble pen and cleaned afterwards.

Gruntz 15mm: The first two factions

I've now collected two factions for my near-future forces for Gruntz 15mm.

The first is a hi-tech interventionist force  ('The Coallition'). They are almost all GZG and will be sand-coloured like the Gulf War allies. Some assets such as the power-armoured squad will be finished in blue-grey or some other neutral colour so they can fight for any faction if that's the way I want to use them.

The Sand faction: Grav IFVs, Grav MBT, Grav Command vehicle, Gruntz squads including squad leaders, SAWs and LAWs, Grav bikes. All models are GZG.

Grav drones, Sand commander, Spider droids, Power-Armour squad. All models are GZG except for the Power-Armour squad which is Brigade Miniatures.

The Gruntz are GZG's UNSC Light Infantry. Command vehicles provide command and control benefits additional to the powers of the Commanders. I'd like to organise the grav drones and probably the grav bikes and spider droids as if they were Gruntz squads rather than having to track them as individual units. This was discussed on the Gruntz Forum but requires further research with regard to costing etc.

The second is a mostly mid-tech force ('RussFed') and will be finished in green.  They are mainly ArmiesArmy Insurgents and represent a near-future version of the Russian forces which have been operating in the Eastern Ukraine. While technically not as advanced they will be rated as more experienced.

Tracked IFVs, tracked MBT, tracked Command vehicle, HMG, Commander, Gruntz including Squad leaders, LAWS, and SAWs, VTOL gunship, and Mecha. The last two are GZG. The rest are all ArmiesArmy.

Constructing the Mecha so that it stood in an animated stance was quite fun. The AA vehicles are part resin which makes them substantially lighter than the GZG ones. They also required less cleaning up. Almost everything was assembled with superglue apart from the arms of the Brigade Models figures which required epoxy resin.

The GZG and ArmiesArmy infantry are a good scale match for each other.

Spoils of War

My raid on Salute 2013 realised:

• A long wait in the cash queue as I had forgotten to buy an advance ticket.
• 1 box of Hexon (two-tone green & brown), some hills and some matching flock for possible use on model bases.
• Some Pendraken/Minibits 100mm MDF bases for making 'SBUAs' (significant BUAs) and woods for my 1940 3mm/Hexon/Hexblitz project.
• Brigade Models 2mm terraced houses & English village packs for same.
• 1 Magister Militum blue felt cloth with 2" hexes (for naval wargaming).
• Some O Scale conical milk-churns (Skytrex) to add period flavour to my IWI games. I'm told I should buff them with steel wool to make them look well-used.
• A cappuccino and an almond croissant (nice but rather expensive compensation for queuing).
• Half-time beer (extortionately expensive and not even real ale).