Sunday 31 March 2013

1/3000 Ship bases

Here is an illustrated guide to how I made and painted bases for my 1/3000 scale pre-dreadnought ships.  The models shown (except for the heading picture which is the Japanese Asama) are all Spanish and American ships from the excellent War Times Journal line, and are based for Phil Barker's Damn Battleships Again (DBSA).

The bases are made from MDF and magnetic plastic. I usually use MDF and steel but these bases are large (2" x 4"). The bases are labelled underneath for temporary recognition purposes. The back edge of the base's topside is ruled off using a template. This is to ensure a flat surface where the final label is going to be stuck.

The base is painted with a thick application of an artist's material, Acrylic Gesso, which is used as a surface preparation and for thickening acrylic paints. 

It is allowed to dry/harden slightly for a few moments only.

A cocktail stick (toothpick), held horizontally, is impressed into the Gesso to create small waves. I work across the base in one direction and then back again. I do all my ship bases on the same diagonal.
It may be that even these small waves are actually overscale for 1/3000 ships but they create an effect which people expect, a sort of postmodern hyper-realism if you like.

The ship is then dropped onto the centre of the base while the Gesso is still wet, effectively sticking it in place. This works well for 1/3000 but might not with heavier models. The ship is also pushed forward slightly with the intention of creating a slight bow wave but I don't think this really works. It might work with larger scale models.

The end of a cocktail stick is then used to scratch a wake.

The base is painted with Vallejo Gunmetal Blue. The use of this metallic colour - which I learnt from Alan Butler of A&A Game Engineering - creates an incandescent effect. This took a leap of faith but I think it works. I suppose you could mix the colour with the Gesso and cut out a stage but I don't fancy dropping my models into a gooey blue mess in case they land upsidedown! The bow wave, the area around the ship and the wake are carefully painted white with a small detail brush.

The tops of the waves are dry-brushed 'against the grain' with white.

The base is finally coated with Future/Klear acrylic floor pollish tinged with a drop of gunmetal blue to tone down the white (as in lower right area). That's it apart from sticking on the ID labels.

4 comments:

  1. That is a very interesting way to base ships - might need to 'copy' that one myself!

    And, thanks for following my blog!

    ReplyDelete
  2. Hi El Grego and welcome. And thanks very much for adding me to your Blog List.

    As you may have noticed I'm currently planning to do some WW2 ships but in 1/6000. I think the wave effect might be very over-scale for them so I'm thinking of using transfers with a sea surface image. I also have a few Napoleonic ships on which I used crumpled tin foil, but the wave pattern from that is rather erratic.

    ReplyDelete
  3. I just found this post and I will be borrowing this technique to base my 1500+ ship collection. The toothpick looks like a great way to make waves and seems much easier than trying to sculpt in waves. Do you have and pictures of the finished base with label? I'm still working out how my new labels will look and am still looking for inspiration.

    Thanks,

    ReplyDelete
    Replies
    1. Hi Mike

      1500+ is impressive! Email me [name of blog]@gmail.com and I'll sort something out.

      Richard

      Delete